Power Box Pro I/O RED V-RAPTOR

The OCTAMAS gear Power Box Pro I/O RED V-RAPTOR mounts directly to the camera V-Mount and provides a 9pin 0B RED EXT Cable to the Camera Extension port. The keyways are strategically positioned to prevent cable collisions and optimize usability. The Power Box Pro I/O RED V-RAPTOR is built to be lightweight and ultra compact.  The housing is constructed with durability in mind using aircraft grade aluminum and a minimum on plastic. Designed, manufactured and tested in Switzerland.

Features:

User-interchangeable Gold and V-mount battery plates

DC-IN 6pin 1B RED (Hot Swap, Block Battery, Crane, Drone, Steadicam, ect). Ext. Battery is prioritized until voltage drops to 12V, then automatic switch to on board Battery.

Onboard fuse for all outputs with a 10A trip and automatic reset (approx 1min). Tripping the fuse will not out the camera.

SMBUS battery data pass-through on V-mount. SMBUS is not available on Gold mount.

 

Connectors:

1x 9pin 0B RED EXT Cable
1x 9pin 0B RED EXT pass-through for SmallHD or use of 9-pin breakout devices and triggers
1x 3pin 24V Fischer RS (max. 4 Amp) with Trigger protocol and trip fused
1x 6pin 1B RED DC-IN (Hot Swap, Block Battery, Crane, Drone, Steadicam, ect)
1x 4pin 00B RED CTRL RCP2 port (smallhd, c-motion, etc)
1x 2pin 0B AUX/PWR unregulated direct power from DC or Battery, trip fused
1x 5pin 0B SMPTE Timecode In/Out & GenLoc (Ambient Style)
1x BNC Genlock
5x D-Tap with shorter positive pins so ground always connects first, unregulated direct power from DC or Battery, trip fused

*Requires Camera Software 1.2.6 and up

*Supports most Batteries up to 94mm wide. Wider Batteries require optional off-set plate

*Standard AB-Mount NO Batt. Info pass voltage Display only (depending on Camera Software)